-
GD-Mission Single Rifle Mag Pouch
$39.99$29.99Constructed from multiple layers of high strength Nylon laminate which is laser cut to prevent the material from fraying over time with high use. The unique space-saving design eliminates seam tape resulting in a slimmer profile to optimize space on your tactical belt or vest.
-
GD-MK3 Laser-Cut Battle Belt
$64.99$49.99The GD-MK3 Laser-Cut Battle Belt is designed specifically for Military use. The ergonomically styled pad offers the optimum balance between stability and agility; cut longer at the sides to improve the stability of magazine pouches and narrows in the middle to aid movement. Supplied with an integrated webbing belt with a quick-release metal buckle to ensure once tightened it will not budge. This belt offers four rows of laser-cut MOLLE for the attachment of pouches/gear.
-
GD-MK4 Combat Shirt
$39.99$34.99Designed for Military or Law Enforcement use this Combat Shirt is the fourth evolution of the original ACS; Created using feedback from professionals, for professionals. Great for use all year round with a lightweight, breathable & moisture-wicking stretch material body that provides high levels of comfort while keeping you dry. The arms, chest, and upper back are made from durable 65/35 PolyCotton Rip-Stop material with mesh armpits for increased airflow. The layout provides zippered admin pockets on both arms that offer storage for a notebook or similar sized items; Side opening zippers mean the pockets remain flat to the arm when empty; Loop-lined pens/pencil pockets allow the addition of patches too.
-
GD-MK4 Laser Cut Mission Belt
$99.99$49.99The MK4 Laser-Cut Mission Belt is lightweight, tough, and highly modular. With laser-cut MOLLE on the belt and yoke, mounting your selected pouches/gear is not an issue. The ten-piece segmented design of the belt pad not only improves comfort/movement but also allows compatibility with drop-leg holsters, pouches, etc…Simply pass the internal webbing belt over the top of your selected segment and connect your gear. The yoke offers a simple design so that it can be worn above or below body armor without causing discomfort. Ideal for military users but will also be of interest to airsoft.
-
GD-Modern Elite Tactical Plate Carrier
$269.99$249.99The GD-Modern Elite Tactical Plate Carrier is a modular vest designed to carry a variety of VX System and MOLLE compatible accessories. With quick-release buckles throughout as well as multiple hook and loop panels, you can create a unique setup that fits your needs. Fully adjustable mesh vented sides with quick release clips and removable shoulder pads make this vest comfortable and easy to adjust. The shoulder pads also feature bladder/comms retention. On the inside, we added padded front and back panels to extend the comfort of the vest. The front of the GD-Modern Elite Tactical Plate Carrier features a zipped admin pouch and hook and loop ID panel. Additionally, you can customize the front using a removable laser cut MOLLE panel included with the product. On the back, you will find a MOLLE panel allowing you to attach any MOLLE compatible hydration pack.
-
GD-Modular First Responder Plate Carrier
$198.95$184.99The Modular First Responder Plate Carrier is the industry standard for light-weight plate carriers. This plate carrier is a “one size fits most” design that can be adjusted to accommodate many different body types.
-
GD-Modular Seat Panel
$149.99$139.99The GD Modular Seat Panel has been designed for use for both fronts (vertical) and rear seats (horizontal). For ease of attaching a wide range of pouches, emergency gear, and holsters the panel has a MOLLE hook-and-loop system (vertical: 10 rows with 7 loops each / horizontal: 6 rows with 11 loops each). The seat panel can be removed from the vehicle quickly, in case you should need to change vehicles.
-
GD-Modular Sniper Pack 45
$439.99$419.99The Modular Sniper Pack is a long-range backpack for a rifle with or without a scope. Backpack and rifle bag can be also used separately. The rifle bag can also be attached to backpack systems like the Modular Pack 30. The weapon compartment can also be used as a pocket for shorter firearms with a zipper making the case smaller. Both the Modular Sniper Pack 45 and the rifle feed are made of resistant 700DEN Cordura and the rifle feed can be used separately. The weapon bag can be completely extracted and the full carrying system can be removed from the backpack and attached to the weapon pocket. On the weapon bag, there are 6 webbing loops in width, which can be used to attach additional bags and other equipment. The weapon carrying compartment on the backpack can be zipped and used as a slip pocket for shorter weapons.
-
GD-MP30 Laser-Cut Backpack
$349.99$334.99The MP30 Laser-Cut Backpack is made with adventurers and hardworking outdoor professionals in mind. Built from sturdy and water-resistant 500D Nylon, you can be sure that your belongings are safe whether you are trekking through the night on a trail, or just walking to class or work. The interior compartment can fully open using one of the high-quality zippers and has a 30-liter capacity – more than enough room for all your essentials for a wide variety of tasks or adventures. Inside and out you can find that it features a MOLLE system so you can easily yet securely attach or detach other pouches for a customizable backpack. The interior also has a loop surface to make sure that your valuables stay put and organized. For those users that like to stay hydrated or connected with technology, this bag also has built-in straw/cable holes for your traveling convenience. The ergonomic design allows you to carry this backpack with ease. The strong Duraflex buckles keep your pack compact while the comfortable shoulder and waist straps keep it balanced. Available in multiple color options – choose which style suits you the best.
Available Color Options: Swat Black, Coyote Brown, OD Green, MultiCam
-
GD-MSPC Plate Carrier
$399.99$389.99When just enough is enough. The bare minimum – while still offering a large degree of modularity and mission essentials. Developed for the professional who requires versatility and reliability in evolving environments. Designed to fit standard SAPI cut plates.
-
GD-Multi-Curve Level III+ 10″ x 12″ Plate
$850.00$699.99Manufactured from High-Density Alumina Ceramic core, backed with layered polymer composite fiber. Rounds are absorbed by this plate on impact, rather than deflected or fragmented. The GD-Multi-Curve Level III+ plates are designed to provide a more affordable option for Level III rifle rated armor with Special Threat Protection against M855 and 7.62×39 Mild Steel Core. Validated according to NIJ 0101.06 ballistic standards at Chesapeake Testing, the world’s most trusted NIJ Certified laboratory, but have not been put through the complete NIJ Certification test due to the limited number available from the COVID pandemic. They are however guaranteed to perform against all stated threats with ultimate minimal backface deformation, greatly outperforming every plate in its class.
-
GD-Multi-Curve Level IV 10″ x 12″ Plate
$659.99$599.99The GD-Multi-Curve NIJ 0101.06 Level IV 10″ x 12″ Plate is the best ballistic solution available. Manufactured from High-Density, reinforced Alumina Ceramic core backed with lightweight layered Polyethylene Fiber and finished in a Black Cordura Nylon Covering. A foam pad is affixed to the inside covering in order to protect against severe drops. NIJ standards require 2 drops. The GD-Multi-Curve Level IV plates passed the internal 10 drop test and were inspected via X-Ray prior to environmental and ballistic testing.